With wide variations respond
to users need promptly!

Standard Sprockets


KANA Sprockets make full performance of the characteristic of Sprockets, roller chains and accomplished high transmission efficiency.
Finished Bore Sprocket
KANA Finished Bore Sprocket are ready for immediate instllation.
These are completely finished the bore to size of shaft dia., keyway and set.
Because these sprockets are manufactured in quantity, it is economical price lower than re-machineing of stock-bore sprocket, which re-boreing, keyway and setscrews.

  • Finished Bore series: Bored to size with standard keyway and set-screws.
  • Finished Bore series are available for Standard "B" Type, Stainless "B" Type, Double Pitch "B" Type and Single Double sprockets.
  • Keyway is on center line of tooth.
  • Metric bore size are also available from stock.
Stock Bore Type "A" Sprocket
Type "A" steel sprockets are usually fitted over hubs or bolted to flanges. The bolt holes can be located to meet any requirement.
Hardened teeth Type HG-A sprockets are also in stock.
Stock Bore Type "B" Sprocket
Type "B" Steel Sprockets are ready for immediate delivery from stock. They are precision made, accurately machined and finished, ready off-the-shelf, to be bored to requirements. Stock bore pinion sprockets with hardened teeth and large teeth sprockets with no hardened in stock. HG-B Type the large teeth sprocket with hardened teeth are also in stock.
Stock Bore Type "C" Sprocket
m-8.jpg Many applications require a sprocket with a hub on both sides, especially in the larger diameters and pitches. Ample hubs are used for the large bores generally required, and for heavy industrial uses this style is the answer.
Double Strand Type "B" & "C" Sprocket
Type "B" & "C" Steel Sprockets multiple strands are ready for immediate delivery from stock. They are precision made, accurately machined and finished, ready off-the-shelf, to be bored to requirements. Stock bore pinion sprockets with hardened teeth and large teeth sprockets with no hardened in stock. HG-2B Type the large teeth Stock Bore sprocket with hardened teeth are also in stock.
Single-Double Sprocket
Single-Double sprockets are ready for immediate delivery from stock. They are used for drive sprocket of roller conveyer system, ANSI 40,50,60,80 series Stock Bore and Finished Bore are available.
Stainless Type "B" Sprocket
Type "B" Stainless Steel Sprockets are ready for immediate delivery from stock. They are precision made, accurately machined and finished, ready off-the-shelf, to be bored to requirements.
Finished Bore and Stock Bore sprockets are available.
Double Pitch Type "B" Sprocket
Finished Bore and Stock Bore sprockets are available for Double pitch roller chain 1",1-1/4",1-1/2",2" and 2-1/2" with standard rolers and carrier rollers.
Weld-Finish Sprockets & Hubs
bo-5.gif KANA offers the most complete line of WELD-FINISH SPROCKETS and HUBS for insertion and welding to products "B" type sprockets quickly. It is economy and save your time.
  • A variety of WELD-FINISH SPROCKET sizes for #35, 41, 40, 50, 60, 80 & 100, Black oxide finish.
  • It is available for V, W, X, XX & Y-series of hub. Black oxide finish.
Taper-Lock Sprockets
bj-7.gif Off-the-shelf service complete with bushing for the desired shaft size can be provided with large range of Taper-Lock Sprockets. They are easily installed, removed and grip firmly, even on worn or under-size shafts.